C1882 Land Rover Auto Trouble Code
C1882 Land Rover OBD2 reports a sensor fault, replacement of the sensor is unlikely to resolve the underlying problem. The fault is most likely to be caused by the systems that the sensor is monitoring, but might even be caused by the wiring to the sensor itself.
Accelerator Pedal Position Sensor 1 Circuit Low and P2127 - Accelerator Pedal Position Sensor 2 Circuit Low would lead you to suspect a defective accelerator pedal position sensor.
C1882 Land Rover Possible Solution:
Vehicle Speed Sensor (VSS) Out of Self Test Range Indicates the VSS input signal is out of Self Test range. If the PCM detects a VSS input signal any time during Self Test, a DTC P1501 will be set and the test will abort. Noisy VSS input signal from Radio Frequency Interference/ Electro-Magnetic Interference (RFI/EMI) external sources such as ignition wires, charging circuit or after market equipment. Check for VSS input to be 0 mph when vehicle transmission is in Park.
C1882 Land Rover Description For All Models :
- Land Rover Defender
- Land Rover Discovery
- Land Rover Discovery 2
- Land Rover Discovery 3
- Land Rover Discovery 4
- Land Rover Discovery 5
- Land Rover Evoque
- Land Rover Freelander
- Land Rover Freelander 2
- Land Rover Lr2
- Land Rover Lr3
- Land Rover Range Rover
- Land Rover Serie I
- Land Rover Series I
- Land Rover Series Ii
- Land Rover Series Iii
- Land Rover Velar
|
C1882 Land Rover Trouble Repair :
With C1882 Land Rover code so start with the basics like a fuel pressure and fuel volume test. Or, you can start on the electrical side by doing a voltage drop on both the power and ground connections for the fuel pump. Some shops are reporting corrosion on the fuel pump ground that reduces power and fuel pressure. |
Code Search
Please fill the search bar to find Auto Trouble Code meaning.